I like exploring in computer games, music, cricket, drawing and pizza and sharing those with people. Oh and I also inherited the name Sleepydwagonman too ! The site is a work in progress at the moment but it's getting there, features will come in over time !
Checking in again ! Has it almost been a fortnight again since last time ?
Before I dive in – this is VERY important. We’ve just had a bit of dumb legislation imposed on us in the UK, which could potentially spread beyond our borders too. It’s the Online Safety Act. If you’re in the UK then you’re affected, please do hit the Petition link and add your signature. It’s a terrible law and it needs to go. Why ? It protects no one, it harms those who need the services behind a number of the adult only sites. For me, it means my protected personal information is now on several third party sites who will almost certainly get hacked and the information stolen. But that’s just the tip of the iceberg with this one, there is so much more Bad in this new law. It’s not a Safety act, it’s an Endangerment act.
I think I left the last post in a bit of a rush. I was looking to get the post out before midnight and the day ticking over. Plus I’d have been running out of the steam between the ears that powers the brain.
How have I been doing ? While I was in the last post, I was suffering from a blocked ear still … I’d had that for maybe a month … I was using ear clearing thingy drops, actually switched from one softener thing to a different softener thing and while it was making a difference, I was still down one ear. It’s quite disorientating …
That was while I was doing the Gromit Hunting at the start of the month too. Gotta do that post ! I’ve managed to see half of the Gromits so far, although that’s been held back by feeling a bit rotten at times, just simply doing other things like massively enjoying finding the lovely MissVadams on Twitch (linky). She’s got a very clear voice, which definitely helped when my ears were bad but also very friendly and just one daft comment from chat or antics in stream away from breaking into that type of laughter that will brighten anyone’s day.
Is also a new catmom having adopted Penny, joining the tortoise Billy who inspired a collection of wonderful Twitch emotes. It’s been a pleasure watching Vic since finding the channel due to a raid in by the also fun to watch FGSquared.
PC stuff ? I came unstuck (or nearly!) a few times with the new PC I talked about last time. It’s a very big unit at 13kg for the case. It’s probably more like 20kg+ now. It’s huge. Which is fairly ok because I’m not going to be moving it around very much. But while I was swapping the cooler in and out all the time in vain attempts to get the All In One Cooler working, that was taking all I had at the time, which is another reason I didn’t immediately migrate over to the new box.
I still haven’t migrated everything over properly yet either. The old PC hasn’t been booted up in a few months now but I have the old data copied over but not sorted into any real sense or order yet. Not quite had the mental spoons to do that just yet.
It has been fun seeing what the new machine can do though …
That’s a mostly static diorama type location from Star Wars Outlaws but the detail there and how it’s brought out by the graphics card is quite incredible. What you’re seeing there is a frame of the big sand crawler vehicle, with textures spread over that frame. They’re then processed to add the depth and to make them look good as a 3d object that you can walk around and see from all angles. Plus there’s the animated characters down there too and the smaller objects in the scene as well. That’s genuinely better than what we would see on movies, such as the originals all those years ago. In earlier generations of 3d graphics, we’d have detail but if you looked close, the textures would repeat over the sides of an object as the systems didn’t have the memory to capture massive detail like what we have there.
Finished Outlaws again, although I need to go back for the second expansion. It’s a long game, fun but feels padded with lots of added optional sidequests. I’ve also been in the Elite world again …
That’s the latest antics, where I’ve taken the brand new megahauler ship and turned it into an explorer craft. That’s the Searching for Rainbows, quite possibly the first Panther Clipper Mk II to visit Sagittarius A* at the centre of the galaxy.
What I call a hole in space in the alt text is Elite’s representation of Sagittarius A*, the supermassive black hole at the centre of our galaxy. The game might be showing its age a little there, although it probably has an easier time with this than it looks from the picture there. The game has very impressive gravity lensing effects, where the visuals of the stars wraps around the big black hole. As you move around the black hole, what you see through it changes dynamically with the angle. It’s very impressive and the static shot doesn’t really do it justice.
That’s been part of the antics in Elite. I haven’t been playing with the alt too much, outside of that speed run, but it’s been a lot of fun tagging along with Ninjaspaceunicorn and Thebigboo with the Hungry Unicorn expedition to the far side of the galaxy and back. We’re on the way back now, not actually that far from the centre of the galaxy.
Anyway, thought I’d better check in. It’s time to post now and read a bit more of book …
I’ve been running an A to Z challenge this year, where I’ve been looking to read something from all of the letters, whether that’s an author or a book title. The latest is The Folded Sky by Elizabeth Bear, as the F book. It’s the third in the author’s White Space universe, a future science fiction universe where AIs run spaceships that go all across the galaxy. There are pilots, a lot of mindfulness, very relatable people and stories that keep you wondering what’s coming next. I didn’t enjoy Hammered that much (different universe, near future Earth) but I would happily recommend Ancestral Night and Machine.
And I think that’s me about out of batteries for tonight. Not sure what’s been happening there, so many people have been commenting that they’re incredibly tired, far more tired than they think they should be or even would have been a few years ago. I think my tiredness starts from burn out over covid times but it’s gotten worse since.
Perhaps it’s worry about loved ones or could be socio-economic pressures. Covid seemed like a scary time but the world seems a lot less settled now. Like things got a lot more dangerous for everyone while we were distracted by a pandemic.
Who knows. All we can do is look after our people. Be kind. Send a little bit of love out there. Be good to people, don’t default to trying to exploit them. Communities of good, nice, wonderful people are out there, I hope you find yours.
Hi all, first of all … why would you want to do that ?
There are lots of manufacturers and sites that will happily assemble and set up a PC for you. So why would you want to build your own ?
The answer for me is very simple. I get total choice on what’s going into the machine for both the components and the software. I can put a bit of extra money in one thing that I think is important and make a sacrifice in something else that I don’t think will matter. I can future proof without breaking the bank. And probably the most important, it gets set up without any of the garbage software that the original equipment manufacturers (OEMs) will preinstall that either doesn’t go away completely when you uninstall it or it comes back again. It’s also bundled stuff like the malware that masquerades as branded anti-virus security software.
You could even choose to go away from the Microsoft Windows ecosystem and go to Linux now. That’s more viable, although I’ll come back to that in a while.
The most important thing is to do as much research as possible before you buy. Retails and online sites will be very keen to put discounts on selected models in their range. If you get tempted by those, ask yourself why the discount is happening. Is the discount because they have a stack of stock they can’t shift out of the warehouse because no one buys it ? Or are they dumping stock because it’s just gone obsolete and end of line. I’ve actually taken advantage of that for my last two laptops, they were both acquired on heavy end of line discounts and happened to be specifications that met my requirement.
This is probably the time for … Disclosure note ! All the decisions for the bits here were mine, I paid for everything, the companies mentioned have no idea who I am and no approaches had been made prior to selection of the bits. (Outside of the usual Overclockers and Scan we’ve got your email in our database robot marketing emails)
The catalyst for this post is to introduce the new build PC that appeared here over Easter. It’s the BunnyBox, named for when it was built again :-D. It follows Pumpkin, assembled on Oct 31 2011 and Meltdown, built on the hottest July day of 2019. But the main aim is to tell all of you reading that : You can do this too. Yes. You can. If you can handle a screwdriver and have a fairly light touch, you can build your home brew PC as well.
The key thing is to do all of the research before you part with any money. I have to admit to making a few mistakes with the BunnyBox, some of which were down to not researching properly, some were trusting the reviews a bit too much. Some mistakes and problems were making some bad assumptions. Oh and I may have forgotten to add the system memory to the order and had to hang around Stoke on Trent a while so they could fetch some out of the warehouse.
But the absolute key thing is : It’s YOUR money. YOUR decision to commit to spending it. Don’t ever feel pressured about spending YOUR money unless you’re absolutely comfortable in doing so. That goes for any pressure you may feel to up the spec when you don’t feel that’s affordable or presents value that you’re comfortable with.
Here’s the BunnyBox spec from Partpicker (linky). Partpicker is actually a really decent site to go to when researching the bits that go together to make a PC. They cut their selections down to what’s compatible. So if you choose an AMD cpu, they won’t show motherboards made for Intel chips. When I updated the list for the memory, it didn’t show memory that the board couldn’t handle. So it’s a handy thing to start from to see what’s out there and quickly get a list of bits.
That’s your motherboard, which everything plugs in to. There are different connectors for everything and they only go in one way around, so the only mistake you can make is to press too hard and break something that way. Don’t worry about that. Modern computer electronics are far more robust than when I was a lad too. It used to be that TTL (Transistor Transistor Logic) chips would break if you touched them wrong, electro static discharge wrist bands used to be required so you wouldn’t zap the bits. I don’t believe you need those these days. (Please no sue me if something doesn’t work ! 😀 ).
The first thing to go in was a 4TB Solid State Device (SSD) storage device. This is an nVME drive, which is the faster one. It’s an M2 format, which is a small card like a stick of chewing gum. Don’t eat it, too crunchy and expensive 😀
Here comes my first error, because I bought the more expensive one with a heatsink on. Cos … Meltdown’s similar SSD gave no problems in almost 6 years but it did run warm. The mistake was not researching that the board came with its own heatsink. I didn’t need to buy the one fixed to the drive. Oh well, coulda saved some cash.
I bought a single SSD because I was assuming that BunnyBox would be running a version of the Linux Operating System and didn’t know how that handled multiple drives. So I bought a bigger (4TB) cheaper one for significantly less than a quicker one of the same size.
Techie note – you’ll see PCIe, that’s the interface of how the components talk to each other. If you look at a computer architecture diagram, the wiring will connect blocks together mostly with the Peripheral Component Interconnect express (PCIe). It’s express cos it’s the considerably improved Mk2 version of PCI, which first got into PCs in the 90s. M2 SSD drives will show a Gen 4, Gen 5 and if you read this in a few years, probably Gen 6 and beyond. The newer versions offer improved transfer rates which might give you a benefit if you’re doing heavy data crunching but I figured I could save pennies (to go into better other bits) by not noticing going for a cheaper ultra fast drive.
That’s the memory going in. That picture actually shows the stick the wrong way around, because I wanted to draw attention to the notch that’s in the bottom of the stick. That’s a polarising notch and makes sure the memory goes in the correct way around because the polarising notch is slightly off the centre. When it’s in right, the grabby arms to the sides of the socket will do their grabby arm thing and close up. You might need to rest the board on something very solid here so it doesn’t flex when you put the memory in. Use the anti-static bag it comes in between Board and Solid Thing to protect everything.
Something else to note here is the sockets to use. There are 4 on the board there, so I could add more in later. However if you look real close (left side of the socket) and can read upside down, you’ll see DDR_A1, DDR_A2, DDR_B1 and DDR_B2 with a “First” beside them. Processors can gobble up 128 bits of data at a time, however the memory sticks send out only 64 bits at a time. So you double them up to get full performance. But they only work doubled up if they’re in the correct sockets. The board manual will tell you which sockets are best. If you put the memory in sockets DDR_A1 and DDR_B2 (mismatched sockets) then your new PC may not boot up at all.
Pardon the messiness of my bedsheet ! The camera picks up all of the dust and I don’t think I have the hand capacity to edit it out :-D. That’s the box, it’s an absolute unit of a Montech King 95 Pro. The 6 fans there are utterly silent when the machine is on and have the gloriness of already being assembled and cabled in to the box. You might see a bit of ducting below and there is more ducting above. The power supply goes in the back and the motherboard sits on that vertical plate. I’m extremely impressed with this case, it has exceptional build quality, it was easy to fit the All In One Cooler in the box above there and the box can fit the biggest coolers. However, it’s also a massive unit, comes in at 13kg and was a pricey £125. Honestly, with the build quality and 6 included silent fans, probably well worth that.
That’s the power supply going in there. Two things here … don’t skimp on the quality, so extra money went into the Lian Li supply there. I have a few power supply makers on my list of shame, Lian Li is actually a new one for me but they have a stellar reputation. The other is to get a big enough one that it can take it easy with the components in the box. So a 750W supply taking it easy at a 500W draw will last so much longer than a 500W supply straining to consistently deliver the same 500W.
It’s a false economy to go cheap on the power supply. Getting a good name one (like Lian Li) will lead to a more reliable and stable machine. And if it breaks, standards like 80+ GOLD means that it won’t break anything else when it … explodes. Not like a friend’s PC which broke all of its components when the cheap no name inadequate power supply melted. PSUs don’t explode … but don’t take one apart to find out as there is 115/240V in there, definitely don’t mess with the big round capacitors, those are the bits that can go boom.
That’s a modular power supply. The older ones came with all of their cables attached to ends on the inside, so they had a mass of unused cable to hide. A modular supply has those sockets there, so you only plug in the cables you require. Less untidy.
That’s skipping ahead a little to the motherboard installed in the box with the processor in there too. The box there is an ATX format box, with ATX dating back to the 90s. Literally IBM AT PC extended. There are newer formats like ITX out there but ATX has been consistent for decades. There is a sockets backplane on the bottom right and the board is secured by an array of small screws.
That’s an AMD Ryzen 7 9800x3d and BunnyBox has one of those due to a big discount that put it in an unbeatable price / performance bracket. I also have a lot of wariness about Intel at the moment because their quality and part resilience has gone downhill lately due to decisions made by their management.
The installation is a bit different again this time around. That’s an AMD AM5 socket. The lever on the left is for a so-called Zero Insertion Force socket. (It’s not zero force!) You use the lever to allow the socket to open and slide the ickle processor into the socket. Again, it’s polarized with the little dot you’ll see on the lower right corner to make sure you put it in the right way round. When you lower the retaining bracket, the black cover seen previously pops off and the lever then locks it in to place.
We can see a couple of black plastic things there too, every processor needs to be cooled because they’ll kick out a lot more heat when they’re busy. The first cooler this machine had was an All In One (AIO) Cooler by Thermalright. These work by having a heat block that clamps on top of the processor using the hooks on the plastic things above and below. The AIO is then connected to a radiator with a couple of pipes filled with cooling fluid. There’s a pump that circulates the fluid and fans to cool the radiator. It’s a lot easier to install coolers on the AM5 generation of socket than the previous AM4 generation.
That’s everything together ! Not quite, because there are buttons and plugs and lights and sockets to wire up too. The PC case has 2 older USB, 1 new USB-C, a couple of audio sockets, a reset button, a power button and a power light. These all plug into sockets on the board, the motherboard manual will have the where to’s here.
But that is actually it. The graphics card is in there as well. Note how close it is to the processor, I’ll come back to that. Also note how close the memory is on the right there. (Foreshadowing anyone ? 😀 )
The next thing is to take a long solid drink, clean up the mess from any blood sacrifices that might have happened along the way. Depending on the build quality of the components, you might have picked up a cut or two. Cheap cases have many more sharp edges. I only got a very minor cut this time around for the somewhat required blood sacrifice. It keeps the Machine Spirit happy :-D.
Plan A for BunnyBox was to abandon Microsoft and go over to Linux. I attempted using Bazzite Linux, as the reviews and things written about it were favourable. It’s worth checking out Linux, it’s free so you lose nothing but a bit of time in exchange for learning about the alternatives that are out there.
This lasted 1 day.
He he, overly dramatic moment there. The machine actually fired up and installed easily first time but I removed it from the machine because I was getting terrible performance with older games like Idle Champions and Motorsport Manager. The Steam platform is starting to get more games designed for Linux but can also support Windows only games by using the Proton translation library. That wasn’t working so good for me, possibly because the Bazzite install didn’t have the info to allow it to properly use the brand new to market nVidia 5060Ti 16GB I bought. And because I couldn’t see how to install the new drivers, I put Bazzite in the bin and went straight back to the known entity of Windows with a WIndows 11 install.
You live, you learn, you add more knowledge.
So I pop Windows in there, install the Horizon Zero Dawn in there and run its benchmark. All is good. Temperatures go up but it gives a result of 160 fps wibblies which was up from the 71 fps wibblies that Meltdown could achieve. It’s an older game but has a good benchmark for testing purposes.
I then look at the BOINC science sums application and … the temperatures rapidly go off into orbit and as AMD Ryzens do, the machine goes into thermal protection where it slows itself down to around a tenth of its potential performance. This is where the panic comes in. I’ll do a bit TLDR there (this post has gone LONG!) and say that I think the AIO cooler wasn’t taking any heat away from the processor, the pipes and radiator were cold. So I swapped it out for …
Yeah. I went back to what I know and bought the most massive air cooler from a good make that I could get hold of at short notice. That’s a Noctua NH-D15 and while it is a fantastic cooler, I did make a couple of errors when choosing it. The fan there is a massive 140mm, there are supposed to be two but the other one clashes on the memory sticks. The cooler is installed off axis as well, about 7mm above where it should be, because it clashes with the graphics card below.
So while Partpicker will give you a LOT of info about whether everything will fit together, it doesn’t know everything. I don’t know everything. I still make errors like that by (going back to the start) not doing all of the research. I checked whether the cooler would fit in the case … not whether it would fit around the rest of the components.
But it all works, BunnyBox is rock solid so far, it’s an absolute powerhouse running the performance hungry Star Wars Outlaws with no frame drops on very high detail so I’m a happy little bunnydwagon here tapping this post into it.
I think that’s where I’d better leave it before I end up posting tomorrow instead of today. I’ll leave you with :
You got this, you can do it too. Read about what you’re planning to put together, use hardware review sites (like Tomshardware) and borrow the specs from their testing rigs. Learn about the bits and it’ll help you out when you have the screwdriver in hand and assembling.
Take it easy, take your time. Don’t panic if things don’t turn on immediately. Just check that all the wires are where they are supposed to be. Repeat your steps if you have to, measure twice install once that kind of thing.
And compare notes with your local geeky techy community too. We’ll love to gossip about components and tempt people into buying new bits and pieces. Just remember that it’s your money, your budget, stick to those limits. If you’re not sure about what you’re about to do, hold off and learn a bit more. Computer bits only get cheaper and better if you wait.
May your Machine Spirits be contented little beasties.
It’s gone a bit warm here ! Time for another of the look back and catch ups that I need to do.
I bet that’s how it feels for everyone with birthdays at this time of year :-D.
Motor racing ? I always look forward to watching the Le Mans 24 hours race and the Nurburgring 24 hours race. They’re the motor racing highlights of the year for me. The tracks are great and there’s a big variation in the cars and teams to especially spice things up.
Whereas most racing circuits are only a few miles long and it takes between a minute or two to go around them, the Le Mans Circuit de la Sarthe is 13.6km long and the Nurburgring Nordschleife is even longer at 25km long. It takes the current top flight hypercars 3.5 minutes to go around the Le Mans circuit and GT3 cars 3 minutes 50 seconds to go around there. The hypercars don’t race on the Nordschleife, the racing there this year was between 136 cars in 27 different classes. The GT3 equivalent there take just over 8 minutes to do a single lap, with the slower cars taking about 11 minutes for a lap. They start the formation lap twenty minutes before the race is scheduled to start and they cut down on potential mayhem by having three separate starting groups.
There are a few reasons why I enjoy watching this form far more than racing like Formula 1 – one of the biggest and we’ll get this out the way first is that the racing is very honest and there’s very little of the infantile behaviour we see from the Formula 1 circus. 😀 Got that out the way so we can focus on the positives.
Another strength of the endurance racing is just how competitive it is now. Previous years have seen the winning cars form up and cross the finishing line in an arranged formation. They could do that because the cars would have laps separating them not. Not now though ! If you want to skip the results (the races were a few weeks before typing so I figure it’s safe to drop these), please do jump ahead to where I post the next meme. That’ll be the Safe Spot. (Now I have to find another meme !)
Le Mans was a close finish again this year, with the 83 yellow privateer team Ferrari finishing strongly being chased by one of the Porsche hypercars. I think the winning margin was about 15 seconds, with the two factory Ferraris taking it a bit easier behind because they were having to limit the driving because they thought their engines were about to go boom.
We’ll see variation in how the cars do as well in the different conditions. The Toyotas weren’t doing so good in the day this year but were very strong in the night. The drivers race the cars at 110%, balancing that in the knowledge that a small incident can either take them out of contention completely or mean they’re in the pits for a couple of laps getting fixed up. That’ll take them out of the running for a win but they can recover to good points playing positions as other cars get incidents.
Nurburgring was a bit of an odd one this year. The organisers know that it’s not a particularly safe track, with a small misjudgment quickly going from getting away with it to having an upside down or otherwise trashed car. F1 cars and the hypercars wouldn’t be racing here because the run off areas are non existent on a very challenging track. if there’s an accident then it will probably be a big one.
So the organisers would usually heavily punish drivers who broke the safety rules. That didn’t happen this year … drivers were being permitted to keep their licenses to race on the track even after doing things like driving at 160+km/h in qualifying when the track had been closed due to a red flag incident. And that was the winner of the race … Other drivers were doing that as well. I hope we see a reaction next year before we get a more serious incident than the ones this year that leads to injured marshals or drivers.
Because we want the racing to be fast, close and with drama … but we don’t want anyone to be hurt during the event.
Another note there – one of the drivers of the 83 Ferrari at Le Mans was Robert Kubica who was retired from F1 contention after suffering multiple serious injuries (details at the wiki link) in a rallying accident. F1 will turn a lot of its discarded drivers into a joke with a trashed reputation, those drivers will then find their way into endurance racing and proceed to show the world what they can do in a competitive racing car. Will Stevens and Antonio Giovinazzi both started in F1, got quickly labelled as terrible drivers because they were in awful cars. Put them in a hypercar and they turn it into a rocket ship.
And I better emerge out of the spoiler space before I ramble too much 😀
A big difference for the Nurburgring is the vast array of cars that compete there. The main result will be fought out very closely between the GT3 sports cars. There was less than 10 seconds over the 8 minute lap separating the top cars in qualifying. And then there are the multitude of slower, less expensive cars that allow people and teams with less resources to compete and even take the scalps of faster cars that had incidents.
Cars like the humble Dacia Logan, which had been upgraded to have a Renault turbo engine that gives it the potential to be competitive in class along with the Beetle RSR car. I was following a Mini that was racing there too.
A lot of the time, I’ll have the racing coverage on a hidden tab with the commentary coming through and I’ll be keeping an eye on the timing numbers. I’ll be following the Dacia, the Beetle, the Mini and cars that have had incidents climbing the field again after they get patched up. I’ll be saying “Dacia’s gonna get you” as the slowest car climbs ahead of a fast car that’s had something unfortunate (and suddenly violent) happen to it.
The mix of cars and speeds of cars also opens up opportunities for the fast cars to close gaps and get past too. It keeps the racing dynamic and interesting. There’s rarely a dull moment, especially in modern day endurance racing where it’s a series of sprints for the full duration of the race broken up by them having a little breather in the pits while they refuel, change tyres and swap out the drivers. There’s almost always something going on.
Have I sold it yet ?
The two big 24 hour races are both done for this year now, we have to wait until next year for Nurburgring and Le Mans again. In the meantime, there are more World Endurance Championship races to go, sadly behind a firewall. There is IMSA racing in the USA, these races go between under 2 hours to the Daytona 24 hour race at the start of the year. I should watch more IMSA racing again, I’ve lost touch with it.
There’s also European Le Mans and Asian Le Mans series. I should look into these, they’re not something I’ve watched.
But whereas F1 quickly degenerates into something in the background to ignore while I’m reading a book, the hypercar and GT3 endurance racing stays compelling even after the longer duration.
Check it out 🙂
PS Also in racing around … Gromit Unleashed 3 started today, I’ll hopefully find my way out and about around as many of the statues as I can get to. I’ll need the temperature to be a bit less though, 2025 me is very unfit and I’m struggling more and more in the heat. But if it’s cool, we’ll see what we can do. Here’s a link to the old blog with the tag that has the Gromit stories.
Thanks for reading, would you like to share ?
Cookie Consent
Hi, I like to see who's visiting me here. I hope you don't mind me asking you consent to a cookie. Hopefully it's tasty, what it does is let me see what country you're from, the referrer site you came in from and the page you looked at. Nothing more, promise ! (Anything more needs a paid service.) If I can see who's visiting, it makes me very happy and that makes me more prone to writing more posts. Thanks for reading !
Websites store cookies to enhance functionality and personalise your experience. You can manage your preferences, but blocking some cookies may impact site performance and services.
Essential cookies enable basic functions and are necessary for the proper function of the website.
Name
Description
Duration
Cookie Preferences
This cookie is used to store the user's cookie consent preferences.
